(903) 437-7049
Metal Roofing Contractor in Tyler, TX
Metal roofing is the installation of steel, aluminum, copper, or zinc panels or shingles on a residential or commercial structure, offering a lifespan of 40 to 70 years or more, superior wind and fire resistance, and lower long-term maintenance costs compared to asphalt shingles. Redline Roofing installs, repairs, and replaces residential and commercial metal roofs across East Texas, using our own trained crews on every project. We install standing seam, exposed fastener, and metal panel systems for homes, commercial buildings, agricultural structures, and multi-family properties.
How metal roofing installation works
- Free on-site estimate. We measure the roof, assess the decking condition, and discuss material and profile options based on your building, budget, and aesthetic goals.
- Material selection. We review standing seam vs. exposed fastener options, gauge and finish choices, and color selection. We order directly from the manufacturer to your specifications.
- Existing roof assessment. We inspect the decking and determine whether tear-off is required. Damaged decking is replaced before any new material is installed.
- Installation. Underlayment is installed, then the metal panels or shingles in the correct sequence per manufacturer specifications. All flashings at walls, penetrations, ridges, and valleys are installed as part of every job.
- Fastener and seam inspection. On standing seam systems, all clips and seams are inspected before the job is closed. On exposed fastener systems, we verify every screw has a properly seated rubber washer.
- Cleanup and walkthrough. All debris and metal cuttings are removed, and we walk the completed job with you before leaving.
Metal roofing cost in East Texas
Metal roofing costs in East Texas vary based on roof size, profile, and material grade. Typical ranges:
- Exposed fastener R-Panel or corrugated (most economical): $4 to $7 per square foot installed, $6,000 to $14,000 for a typical residential roof
- Standing seam steel (premium residential and commercial): $8 to $14 per square foot installed, $12,000 to $22,000 for a typical residential roof
- Standing seam aluminum (coastal or high-corrosion environments): $10 to $16+ per square foot installed
A standard standing seam installation on a 1,500-square-foot home typically runs around $12,000 with mid-grade 26-gauge Galvalume panels. Size, pitch, complexity, and panel profile all affect the final number. Redline provides free written estimates after an on-site measurement.
Metal roofing systems we install
| Feature | Standing Seam | Exposed Fastener (R-Panel) |
|---|---|---|
| Fastener exposure | Concealed - no screws penetrate the surface | Screws visible through panel surface |
| Leak risk | Very low - no fastener penetrations | Low to moderate - rubber washers wear over 8–12 years |
| Cost (installed) | $12–$18 per sq ft | $5–$8 per sq ft |
| Lifespan | 40–70 years | 30–40 years |
| Thermal expansion | Floating clip system accommodates movement | Less flex - screws may loosen over time |
| Best for | Premium residential, commercial | Agricultural, shops, budget residential |
| Maintenance | Minimal - inspect seams and flashing annually | Replace fasteners every 8–12 years |
Standing seam. Panels with concealed fasteners and raised seams. No fasteners penetrate the roof surface, which eliminates the most common metal roof leak point and allows for thermal expansion. The standard for quality residential metal roofing in East Texas.
Exposed fastener (R-Panel, corrugated). More economical than standing seam. Common on agricultural buildings, shops, commercial structures, and budget-conscious residential projects. Requires periodic fastener maintenance as rubber washers wear over time - typically every 8 to 12 years in East Texas conditions.
Metal shingles. Individual shingle-style metal panels that give the appearance of traditional shingles or slate with metal durability. Used when a more traditional roofline aesthetic is desired.
Why metal roofing performs well in East Texas
East Texas roofs face summer temperatures exceeding 100 degrees, spring and fall hail seasons, and periodic high-wind events. Metal roofing addresses each:
- Heat. Reflective coatings reduce heat absorption compared to dark asphalt shingles, contributing to lower cooling costs.
- Hail. Metal roofing is substantially more resistant to hail damage than asphalt shingles. Most metal roofs carry a Class 4 impact resistance rating, the highest available.
- Wind. Metal roofing is rated to withstand winds of 140 mph and higher depending on the system, far exceeding typical asphalt shingle wind ratings of 60 to 110 mph.
- Fire. Metal roofing carries a Class A fire resistance rating.
- Longevity. A 40 to 70 year lifespan means a metal roof installed today will likely outlast two or three shingle roof cycles, reducing total long-term roofing cost.
Metal roof repair
Redline repairs all types of metal roofing systems. Common repairs include:
- Fastener replacement on exposed fastener systems (rubber washers deteriorate over 8 to 12 years)
- Panel replacement after impact or storm damage
- Seam re-welding on standing seam systems
- Flashing repair at penetrations, walls, and ridges
- Recoating of older panels where the factory finish has degraded
Where we serve
Redline Roofing provides metal roofing services throughout East Texas, including Tyler, Longview, Kilgore, Lindale, Whitehouse, Bullard, Jacksonville, Henderson, Nacogdoches, Palestine, Athens, Canton, Mineola, Quitman, Winnsboro, Mount Pleasant, Sulphur Springs, Pittsburg, Gilmer, Gladewater, and Hallsville. Call (903) 437-7049 to get started.
Credentials
Redline Roofing and Construction LLC is fully licensed, bonded, and insured in Texas. We carry general liability coverage and workers compensation on every crew. All installations are completed by Redline employees, not subcontractors. We hold an A+ rating with the Better Business Bureau.
Project gallery
What our customers say
"We went with standing seam metal after our third shingle replacement in 20 years. Redline measured everything precisely, gave us a detailed written quote, and finished the installation in two days. The crew was clean and professional. Two years in and the roof looks exactly the same as day one."
David P., Tyler TX, February 2023
"Had an older exposed-fastener metal roof on our shop that was leaking at several points. Redline came out, identified which fasteners had failed, replaced them, and resealed the flashing. Honest assessment - they told me the roof had another 10 years in it without a full replacement. That's the kind of contractor I'll call back every time."
Gary T., Longview TX, August 2023
"Redline installed a standing seam metal roof on our home after hail took out the shingles. They handled the insurance documentation and the installation was clean from start to finish. The crew left the yard cleaner than they found it."
Michelle R., Kilgore TX, April 2024
Schedule a free metal roofing estimate
Call Redline Roofing at (903) 437-7049 or submit the form on this page to schedule a free on-site measurement and estimate. We are available seven days a week throughout East Texas.